Install: classic 68030

Machine	CD	Target
A3000 + A4091 or A4092	A4091/A4092 id 3 (`1,3`)	the A3000's own SCSI, id 6
A4000 with a full 68030 (MMU) card + A4091	A4091 id 3 (`0,3`)	A4091 id 6

Other disk controllers: A2091, A3091. Ethernet: A2065.

Supported · emulation Tested in emulation only; not run on real hardware for 1.0.

the classic kit: boot floppy, root floppy, install CD;
the CD in a drive at SCSI id 3, and the target disk at SCSI id 6 (table above). Everything on the target is erased.

Write the two ADFs to floppies. Boot the boot floppy.
At Insert floppy disk 2 (root file system) and press RETURN. swap in the root floppy (same drive), RETURN.
Answer the interview. The installer finds the CD by itself: Installing from the CD-ROM drive at 1,3. (0,3 on the A4000/030).

Wait for each question to appear before you type; keys pressed while the system is still starting are lost.

Prompt	Answer
`Which keyboard are you using? [12]`	`RETURN` (American), or your map's number
`Do you want to install or repair? [install]`	`RETURN`
`How many megabytes is this disk? [100]`	blank disk only: its real size, 200 or more
`Are you sure you want to erase this disk?`	disk with partitions only: y (no default)
`How many megabytes for the root file system? [158]`	`RETURN`
`How many megabytes for the swap partition? [30]`	`RETURN`
`What file system type is the root partition? [ufs]`	`RETURN`
`Choose: [1]`	`RETURN` (Standard Amiga UNIX installation, 17 packages); 2 everything on the disc (30)
`Verbose install? [n]`	`RETURN`
`Do you wish to change any of these? [n]`	`RETURN` — check `Install to: SCSI id 6` first
`Press RETURN to halt the system.`	`RETURN`, wait 10 seconds, switch off

The defaults shown are for a 200 MB disk.

Then boot the installed disk: the first-boot dialog (aen0 only, no DNS question), and log in as root.

Memory: 64 MB (the emulator configs ship with 64 MB); at 16 MB set 2 fails and set 1 is untested. Disk sizes per package set: the sizes table.

Stuck? Report it in jusii/amigaux; see Support.