Writing the image
First check and unzip the download: Checking a download. The image is then 3600 MiB, or 1800 MiB for an IDE or Buddha image.
The 68060 image: copy it to the Z3660 card
The Z3660 keeps its disks as files on its SD card. Do not write the image to the card: copy it
as a file into the hdf/ folder on the card's exFAT partition, beside the other disk images. Then
point a preset at it: Install on a Z3660.
The 68030 image: write it to a disk
The image is a whole disk. Write it to a SCSI disk of 3600 MiB or more, which then goes at SCSI id 6; the rest of a larger disk stays unused. With a SCSI emulator, use the unpacked file as the emulated disk's image, at id 6. Everything on the disk is lost.
Linux: find the disk with lsblk, then, with the disk at /dev/sdX:
sudo dd if=amix-1.1.2-k30-4g.img of=/dev/sdX bs=4M conv=fsync status=progress
macOS: find the disk with diskutil list, then, with the disk at /dev/diskN:
diskutil unmountDisk /dev/diskN
sudo dd if=amix-1.1.2-k30-4g.img of=/dev/rdiskN bs=4m
Windows: use a raw disk-image writer, for example Win32 Disk Imager, and pick the whole disk.
Check the device name twice: dd overwrites whatever disk you name. Then
install.
The IDE images: write them to a CF or SD card
The image is a whole disk of 1800 MiB. Write it the same way, to a CF or SD card of 2 GB or more, which then goes on the IDE port as the master; the rest of a larger card stays unused. Everything on the card is lost.
sudo dd if=amix-1.1.2-k46-ide-2g.img of=/dev/sdX bs=4M conv=fsync status=progress
Use amix-1.1.2-k30-ide-2g.img for a 68030. On macOS and Windows, as for the 68030 image above.
Then install.
The Buddha images, amix-1.1.2-k46-buddha-2g.img and amix-1.1.2-k30-buddha-2g.img, are written
the same way, to a disk or card that then goes on the Buddha's first port as the master:
on a Buddha.