amigaux 1.1.1
Released 2026-11-15, on GitHub.
Tested in emulation only: the installer onto every controller 1.1 supports, on both lines (the
Z3660, the A4091, the A3000's and the A4000T's SCSI, and the A4000 and A1200 IDE port), and onto a
Buddha and a Catweasel Z-II; each ready-made image installed and booted on its machine and brought
up an X-Surf as xsf0 by DHCP, two of them also with a fixed address. The new drivers are not yet
tested on real cards.
A point release of 1.1 with two new drivers, as packages. Both are tested in emulation only, on both kernel lines, not yet on a real card. Everything else is as in 1.1.
What is new in 1.1.1
- Buddha IDE, the module
buddha: the two IDE ports of the Individual Computers Buddha. The system disk can be on either port, as master or slave, also a single drive jumpered as slave; CD-ROM drives work too. The machine boots from a Buddha disk through the card's own ROM, as before, and the kernel then drives it. Catweasel Z-II, its three ports: tested in emulation on both lines, the system disk on its first or third port, a data disk on the third and an ATAPI CD-ROM, with interrupt-driven I/O; not yet on a real card. Packagesbuddha-k30andbuddha-k46. The system disk. - X-Surf Ethernet, the module
xsurf: the Individual Computers X-Surf-100, in Zorro II or Zorro III, and the original X-Surf. The interface isxsf0, set up in/etc/inet/interfaceslike any other, by DHCP or a fixed address. Packagesxsurf-k30andxsurf-k46. Networking.
Adding them to an installed 1.1
Both need kbootset 1.1.0.261114-45 or later. As root, first:
apkg update; apkg upgrade
Then the package for your kernel line, -k46 on a 68040 or 68060, -k30 on a 68030:
apkg install buddha-k46
apkg install xsurf-k46
The driver loads from the next boot. Without the upgrade the package installs, but kbootset refuses to build a boot generation with it and says why; nothing changes.
A system disk moved to a Buddha from another controller needs one rebuild: moving the system disk.
The install media and images
The 1.1.1 files replace 1.1's: the same installer, which also installs onto a disk on a Buddha or a Catweasel Z-II, and two new ready-made images for the master on a Buddha's first port (on a Buddha). The install CD, the boot floppies and the Z3660 boot disk start 1.1's installer RAM disk unchanged, so three of its messages (two install discs in the drives, a medium it cannot read, a disc that does not fit the machine) still say "amigaux 1.1 install disc"; that is expected, and it takes a 1.1.1 or a 1.1 install disc.
Every system installed from the 1.1.1 files carries both drivers in its boot generation: a Buddha
beside the system disk's controller is driven, and the first boot offers an X-Surf as xsf0, with
DHCP or a fixed address. A card fitted later comes up by DHCP when the system was set up with
DHCP, else by a line in /etc/inet/interfaces. Downloads.